AMEC CAMINO-101 Manuel d'utilisateur

User’s Manual User’s Manual

4 surrounding vessels when these information are transmitted. Users must be aware of this risk and ensure that all information entered into the syst

5 2.1.3 Items in the Package Please verify items in the package. If any is missing, please contact your local AMEC representative. The CAMINO-101

6 NOTE: AMEC would not be able to fully ensure overall product performance if longer cable length other than the above specified length is used. 2.

7 2.2.2 Step by Step Installation Instructions AMEC CAMINO-101 can be installed and mounted on flat surface, or it can be mounted on wall as shown

8 *NOTE: CAMINO-101 SUPPLIES ONLY 3.3V FOR GPS ANTENNA. WE RECOMMEND USING AMEC GPS ANTENNA (3.3V) WITH CAMINO-

9 Note: The required power voltage for CAMINO-101 is 12V / 24V DC. Use an adaptor if the supply voltage is not within the range.

10 Figure 2-2-3-1 Wiring definition in Power Cable 2.2.3.2 NMEA 0183 Connector: Pin Definition and Cable Wiring The NMEA 0183 cable su

11 NOTE: 1. Please make sure the external device is fully NMEA 0183 compliant. 2. The CAMINO-101 NMEA interface supports the following

12 RS-232 Connection Illustration (CAMINO-101) The RS-232 cable supplied with CAMINO-101 contains 9 different wires. However, only 3 wires are being

13 RS-232 Connection Illustration (CAMINO-101A & CAMINO-101W) The RS-232 cable supplied with CAMINO-101A & CAMINO-101W consists of 3 wires d

I COPYRIGHT The entire contents of this instruction manual, including any future updates, revisions, and modifications, shall remain the property of

14 2.2.4 VHF Antenna Installation The quality and positioning of the antenna are the most important factors dictating AIS performance. It is recomm

15 2.2.5 GPS Antenna Installation The GPS antenna must be installed where it has a clear view of the sky, so that it may access the horizon freely w

16 2.2.7 CAMINO-101 External Connections NMEA0813External GPS Source12V / 24V Power SourceChartPlotterGPS AntennaVHF AntennaTx Off BoxBluetooth A

17 2.2.8 AMEC AIS Configuration Software Installation This program enables users to set up own ship’s dynamic, static, and voyage related informatio

18 Step 3: Please read and accept the license agreement before clicking on to continue. Figure 2-2-8-2 Set up Configuration Step 4: Please

19 Step 5: Select the destination folder and click on to continue. Figure 2-2-8-4 Set up Configuration Step 6: Select the Start Menu group

20 Step 7: The installation will start immediately, please wait for a short moment. Figure 2-2-8-6 Set up Configuration Step 8: Please click o

21 2.3 Bluetooth Pairing (Optional Feature) (CAMINO-101W only) For CAMINO-101W with Bluetooth, please consult the manual of your Bluetooth device fo

22 3.2 Front Panel LED Indicators Table 3-2-1 Brief description of LED indicators LED INDICATORS Power LED Description Green Steady De

23 Table 3-2-2 Power LED Indicator in detail POWER LED INDICATOR LED Color Indication Description Green Steady Normal Device in normal operation

II FOR USERS IN THE UNITED STATES OF AMERICA ONLY WARNING: It is a violation of the rules of the Federal Communications Commission to input an MM

24 3.3 CAMINO-101 Configuration Settings To configure CAMINO-101, use the AMEC AIS Configuration software in the provided CD-ROM. The software has

25 ! WARNING: MMSI can only be entered once, please be sure entering the correct MMSI. (3) Fill in the dimension of your own ship at “SHIP DIMENSION

26 Step 3: Transceiver Setting (1) To disable DSC monitoring function, select the “OFF” button. The default setting is “ON” (DSC enabled). (2) To

27 Step 4: Baud Rate Setting (1) Click on “BAUD RATE” tab. (2) The default baud rate for RS-232 is 38,400, enter your desired baud rate if necessa

28 (5) To perform other settings, click on another tab to go further. (6) To read the device information, click on . A Configuration Report will po

29 Figure 3-3-2-1 shows the status of the device when initially connected. Figure 3-3-2-1 System Check Figure 3-3-2-2 shows the status of the d

30 GPS Status: This tab shows the GPS status and the connectivities of all GPS satellites being used. Figure 3-3-2-3 GPS Status Data Log: The

31 4 AMEC AIS VIEWER DESCRIPTION The AIS Viewer is a complimentary charting software for the purchasing of AMEC AIS Class B equipment. The softw

32 IEC 62287-1 Ed. 2, 2010 IEC 61162-1 Ed. 3, 2007 IEC 61162-2 Ed. 1, 1998 IEC 61108-1 Ed. 1, 2003 IEC 60945 Ed. 4, 2002 ITU-R M.1371-4, 2010 DSC RE

33 Power LED (dual color) Channel 1 LED (dual color) Channel 1 LED (dual color) GPS RECEIVER (integrated) Receiving Channels Accuracy Outpu

III FOREWORD Congratulations on the purchase of your new CAMINO-101 Automatic Identification System (hereinafter called “AIS”). Wherever

34 PHYSICAL Width Height Depth (include connectors) Weight 140 mm (5.51 inch) 50 mm (1.91 inch) 200 mm (8.66 inch) 870 g SOFTWARE TOOL AMEC AIS Co

35 GENERAL ENVIRONMENTAL PHYSICAL AMEC AGGRESSOR-21 GPS Antenna SPECIFICATIONS (Optional) Center Frequency 1575.42 ± 2 MHz Gain 30 dB, typica

36 5.2 Dimensions Front View Top View Figure 5-2-1 CAMINO-101 Front View Figure 5-2-2 CAMINO-101 Top View

37 5.3 Ordering Information Table 5-4 Accessories Item Model Name Description 1 CAMINO-101 Standard AIS Class B transponder, silen

38 5.5 Trouble Shooting 5.5.1 Diagnosis by LED Indicators  The power indicator changes to different color indicating its current status. User i

39 5.5.2 Problem Analysis Power Problem 1. Check if the power cord is fallen or loose. 2. Check if using

40 ‧Power Status Indicator: Orange ‧Signal data cannot be received by other vessels Signal Transmitting Pro

41 6 AMEC WORLD WIDE WARRANTY Limited warranty Subject to the terms, conditions and limitations set forth in this Worldwide Limited

42 Costs associated with routine system checkouts, alignment/calibration, sea trials or commissioning; Defects or damage that result f

43 No oral or written representations made by AMEC or any seller, reseller or distributor of the products, including employees and

Table of Contents I. COPYRIGHT & DISCLAIMER II. WARNING & SAFETY INSTRUCTION III. FORWARD Page 1 INTRODUCTION ...

44 8 DECLARATION OF CONFORMITY Hereby, Alltek Marine Electronics Corp. (AMEC) declares that this CAMINO-101 is in compliance with t

4 AMEC AIS VIEWER DESCRIPTION ... 31 5 APPENDIX ...

1 1 INTRODUCTION 1.1 CAMINO-101 Overview The CAMINO-101 is a Class B AIS transponder using carrier-sense TDMA (CSTDMA) technology. It is designe

2 1.2 Type of AIS There are mainly two types of AIS transponder: Class A and Class B. The intended nature of these AIS systems in navigations is dif

3 1.4 AIS Report Rate The CAMINO-101 supports following report rates in accordance to ITU-R M.1371 and IEC 62287-1. Table 1-4 CAMINO